Refrigerant Leakage Detect
Indoor unit will show error code “EC” and stop automatically when refrigerant leakage is detected. This function can better protect compressor being damaged by high temperature due to refrigerant leakage.
Self-diagnosis and Auto-protection
Once abnormal operation or parts failure happen, the unit will shut off automatically to protect the system. Meanwhile it will indicate protection or error code for fast service.
Low Ambient Cooling
With built-in low ambient kit or special designed PCB, outdoor fan speed can be changed automatically according to condensation temperature. The air conditioner can run cooling operation even when the outdoor ambient temperature down to 5°F.
Chassis Heating Belt
Heating belt is fitted on the base plate of outdoor unit to prevent defrosting water accumulated, which improves heat transfer efficiency.
Temperature sensor built in the remote controller will sense its surrounding temperature. So the unit can adjust room temperature more accurately to give you comfort.
This function gives you a boost in cooling and heating power for a period, and makes the room cool down or heat up rapidly.
Anti-cold Air Function
Indoor fan speed is regulated automatically from the lowest grade to the setting grade according to evaporator temperature when the unit just starts heating operation. This function can prevent cold air blowing out to avoid discomfort to the users.
Indoor fan will run at super breeze speed and indoor noise level can be extremely low when the unit enters silent mode operation.
12 Grades Indoor Fan Speeds
Up to 12 grades indoor fan speeds, ensure more accurate control and bring more comfortable air flow.
5 Grades Outdoor Fan Speeds
Due to the DC fan motor, outdoor fan speeds increased from 2 grades to 5 grades, more comfortable and energy saving.
Intelligent on-off technology enables Midea products automatically enter energy-saving mode when standby, cut energy consumption from normal 5W to 1W or 0.5 W per hour which counts 80%-90% of saving.
The function enables the air conditioner to automatically increase cooling or decrease heating 1℃ per hour for the first 2 hours, then holds steady for the next 5 hours, after that it will switch off. This function maintains both energy saving and comfort at night.
Both left and right sides of indoor unit are possible for drainage hose connection, easy for installation.
Auto Restart Function
If the air conditioner breaks off unexpectedly due to the power cut, it will restart with the previous setting mode automatically when the power resume.
Main Functions can be changed by modifying programs of remote controller, you can design your most comfortable settings and delete those you don’t need.
Louver Position Memory Function
Horizontal louver will automatically move to the same position as you set last time when the unit turned on.
Single & Multi Compatible
Compatible indoor unit for both mono and multi inverter system. It comes in handy for warehouse management.
Cold Catalyst Filter
Eliminate volatile organic compounds(VOCs) as well as harmful gases and odors.
Optional Super Ionizer
Release positive and negative ions, eliminate odor, dust, smoke and pollen particles to give you fresh and healthy air.
Release negative ions, eliminate odor, dust, smoke and pollen particles to give you fresh and healthy air.
Optional Compound Filter
Combine three filters from 8 different types including cold catalyst filter, negative ion filter, anti-mite filter, enzyme filter, nano-Pt filter, nano-Ag filter, multifunction filter to meet various needs simultaneously.
Optional Wired Controller
Compared with infrared remote controller, wired controller can be fixed on the wall and avoid mislaying. It’s mainly used for commercial zone and makes air conditioner control more convenient.
Set the unit to start and stop automatically in a 24h period.
Indoor unit will continue running at special combined mode to blow and dry indoor evaporator after the unit switched off so as to keep clean and healthy